Skip to content
Water Only Water
BACKGROUND
The technology of purifying water and removing its contaminants has been explored for many years. There are 2 primary methods in use today. The first method uses mechanical filters made up of particular materials that the water runs through. The 2nd method uses electrical ionization of the water. Both these methods are highly unreliable, very costly and requires constant maintenance and expense.
Prior Research and IP Technology
Research in this area shows that these technologies have been have not been significantly improved upon for many years. A new method and technology in this area has long been sought after with no avail. WOW is just that. WOW uses newly developed technology that revolves around using Frequency Pattern Technology (Click here to understand and learn more about the discovery of FPT) and electromagnetic resonance to isolate 99.7% of all contaminants from water. This method and technology can desalinate water, and transform any amount of water that contains any impurities into “True Water” without using mechanical filers, ionization or any chemicals.
Research of Existing Patents and Technology shows there are companies that have patents in the water purifying, filtering, decontaminating area. Since none of these existing patents use a similar or even a remotely similar mechanism, it should also be pointed out that this system is a hundred or more times efficient and maintenance free with virtually none of the required maintenance that all of the other methods and systems require.
INTRODUCTION
1) Wow uses FPT to transmit proprietary frequency patterns into the water. These frequency patterns will dissolve certain contaminants and/or isolate & quarantine other targeted contaminants which may not be dissolvable based on their molecular makeup for easy removal and separation.
2) WOW revolves around 2 different methods of application. Method 1 will use a specially designed tube or pipe that is attached to the output of the pump. This pipe houses the electronics that sends the FPT Patterns into the contaminated water that is going through the pipe. This pipes construction include interior channels and ports so that the contaminated water can be isolated then molecularly disassembled into its base elements and removed from the water if needed.
Method 2 isolates the targeted contaminants prior to pumping and while it is still in the contaminated container (Ocean, etc.). Method 2 isolates the contaminants from its adjacent area then molecularly disassembles and re-assembles it into base elements which are natural occurring in that body of water so that the contaminants do not have to be pumped out with the water. Which method will be used depends on the specific application.
3) WOW uses Proprietary Frequency Patterns, Amplitudes, and Waveforms that range from 3 Hz. to 3 THz. These Proprietary Patterns will allow Wow to remove contaminants on a molecular level.
4) WOW is capable of using Batteries, A/C Power, and Rechargeable batteries.
5) WOW is capable of de-contaminating a minimum of 3.3 Liters/sec. or 198 liters/min. and 11,880litters/ hr. and in 8 hours (A day) which would be 95 m3. Of course, if your using a pipe this also depends on the diameter of the pipe your using to pump the contaminated water. The Maximum pipe diameter for the prototype would be 8”.
5) WOW exploits certain electromagnetic properties in the medium used
(I.e. Ocean, Land etc.).
6) WOW’s primary mechanism is similar to Fire No More™. However, there are differences in the specific frequency patterns, input & output power supply stages, and transmitting & receiving stages.
